WATERMAID® SC300 Genuine Replacement Cel
- Capacity 90,000 litres
- Operating salt level 6,000 ppm
- Compatible with the WM40 Power Supply
- Full-flow installation
- Suits 50mm (2") pipe work
- Electrode length = 20cm
- SC300 Casing length = 36cm
There are two connection types for the WM40:
i) Plug/Socket Connection: the cell cable has a plug that plugs into a socket located at the base of the power supply.
ii) Junction Box Connection: the cell cable has three small wires which are screwed into the brass terminals of a black junction box (using a screw driver) located at the base of the power supply.
Watermaid® QT300 Genuine Replacement Cell
- Capacity 90,000 litres
- Operating salt level 6,000 ppm
- Compatible with the WM40 Power Supply
- Full-flow installation
- Suits 40mm (1.5") pipe work
- Electrode length = 20cm
- Casing length = 36cm (measured from thread to thread)
There are two connection types for the WM40:
i) Plug/Socket Connection: the cell cable has a plug that plugs into a socket located at the base of the power supply.
ii) Junction Box Connection: the cell cable has three small wires which are screwed into the brass terminals of a black junction box (using a screw driver) located at the base of the power supply.
WATERMAID® SC400 Genuine Replacement Cel
- Capacity 150,000 litres
- Operating salt level 4,000 ppm
- Compatible with the WM40 Power Supply
- Full-flow installation
- Suits 50mm (2") pipe work
- Electrode length = 20cm
- SC400 Casing length = 36cm
There are two connection types for the WM40:
i) Plug/Socket Connection: the cell cable has a plug that plugs into a socket located at the base of the power supply.
ii) Junction Box Connection: the cell cable has three small wires which are screwed into the brass terminals of a black junction box (using a screw driver) located at the base of the power supply.
Watermaid® EZ300 Genuine Replacement Cell
- Capacity 90,000 litres
- Operating salt level 6,000 ppm
- Compatible with the WM40 Power Supply
- Removable centre electrode for ease of maintenance
- Venturi installation
- T-Piece available in 40mm or 50mm
- Electrode length = 20cm
There are two connection types for the WM40:
i) Plug/Socket Connection: the cell cable has a plug that plugs into a socket located at the base of the power supply.
ii) Junction Box Connection: the cell cable has three small wires which are screwed into the brass terminals of a black junction box (using a screw driver) located at the base of the power supply.
